148 lines
4.6 KiB
C++
148 lines
4.6 KiB
C++
/* Pin layout used:
|
|
* -----------------------------------------------------------------------------------------
|
|
* MFRC522 ESP8266
|
|
* Reader/PCD Feather Huzzah
|
|
* Signal Pin Pin
|
|
* -----------------------------------------------------------------------------------------
|
|
* SPI SS 1 SDA(SS) SDA/4
|
|
* SPI SCK SCK 14 / SCK
|
|
* SPI MOSI MOSI 13 / MOSI
|
|
* SPI MISO MISO 12 / MISO
|
|
*
|
|
*/
|
|
|
|
#include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
|
|
#include <ESP8266HTTPClient.h>
|
|
|
|
#include <WiFiClient.h>
|
|
|
|
#include <MFRC522v2.h>
|
|
#include <MFRC522DriverSPI.h>
|
|
#include <MFRC522DriverPinSimple.h>
|
|
#include <MFRC522Debug.h>
|
|
|
|
MFRC522DriverPinSimple ss_1_pin(4); // Configurable, take an unused pin, only HIGH/LOW required, must be different to SS 2.
|
|
|
|
MFRC522DriverSPI driver_1{ss_1_pin};
|
|
|
|
MFRC522 reader{driver_1}; // Create MFRC522 instance.
|
|
|
|
|
|
|
|
void setup() {
|
|
// WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
|
|
// it is a good practice to make sure your code sets wifi mode how you want it.
|
|
|
|
// put your setup code here, to run once:
|
|
Serial.begin(115200);
|
|
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
|
|
//WiFiManager, Local intialization. Once its business is done, there is no need to keep it around
|
|
WiFiManager wm;
|
|
|
|
// reset settings - wipe stored credentials for testing
|
|
// these are stored by the esp library
|
|
// wm.resetSettings();
|
|
|
|
// Automatically connect using saved credentials,
|
|
// if connection fails, it starts an access point with the specified name ( "AutoConnectAP"),
|
|
// if empty will auto generate SSID, if password is blank it will be anonymous AP (wm.autoConnect())
|
|
// then goes into a blocking loop awaiting configuration and will return success result
|
|
|
|
bool res;
|
|
// res = wm.autoConnect(); // auto generated AP name from chipid
|
|
// res = wm.autoConnect("AutoConnectAP"); // anonymous ap
|
|
res = wm.autoConnect("MoodBox"); // password protected ap
|
|
|
|
if(!res) {
|
|
Serial.println("Failed to connect");
|
|
// ESP.restart();
|
|
}
|
|
else {
|
|
//if you get here you have connected to the WiFi
|
|
Serial.println("connected...yeey :)");
|
|
}
|
|
|
|
|
|
reader.PCD_Init(); // Init each MFRC522 card.
|
|
|
|
}
|
|
|
|
void loop() {
|
|
// put your main code here, to run repeatedly:
|
|
WiFiClient client;
|
|
HTTPClient http;
|
|
|
|
if (reader.PICC_IsNewCardPresent() && reader.PICC_ReadCardSerial()) {
|
|
// Show some details of the PICC (that is: the tag/card).
|
|
MFRC522Debug::PrintUID(Serial, reader.uid);
|
|
// Halt PICC.
|
|
reader.PICC_HaltA();
|
|
// Stop encryption on PCD.
|
|
reader.PCD_StopCrypto1();
|
|
|
|
Serial.print("[HTTP] begin...\n");
|
|
// configure traged server and url
|
|
http.begin(client, "http://192.168.1.32:3000/rfid_tags"); // HTTP
|
|
http.addHeader("Content-Type", "application/json");
|
|
|
|
Serial.print("[HTTP] POST...\n");
|
|
char str[32] = "";
|
|
array_to_string(reader.uid.uidByte, 4, str); //Insert (byte array, length, char array for output)
|
|
Serial.println(str); //Print the output uid string
|
|
// start connection and send HTTP header and body
|
|
int httpCode = http.POST("{\"identifier\":\"" + String(str) + "\"}");
|
|
|
|
// httpCode will be negative on error
|
|
if (httpCode > 0) {
|
|
// HTTP header has been send and Server response header has been handled
|
|
Serial.printf("[HTTP] POST... code: %d\n", httpCode);
|
|
|
|
// file found at server
|
|
// if (httpCode == HTTP_CODE_OK) {
|
|
if (httpCode == HTTP_CODE_CREATED) {
|
|
const String& payload = http.getString();
|
|
Serial.println("received payload:\n<<");
|
|
Serial.println(payload);
|
|
Serial.println(">>");
|
|
displaySuccess();
|
|
}
|
|
} else {
|
|
Serial.printf("[HTTP] POST... failed, error: %s\n", http.errorToString(httpCode).c_str());
|
|
displayError();
|
|
}
|
|
|
|
http.end();
|
|
}
|
|
}
|
|
void array_to_string(byte array[], unsigned int len, char buffer[])
|
|
{
|
|
for (unsigned int i = 0; i < len; i++)
|
|
{
|
|
byte nib1 = (array[i] >> 4) & 0x0F;
|
|
byte nib2 = (array[i] >> 0) & 0x0F;
|
|
buffer[i*2+0] = nib1 < 0xA ? '0' + nib1 : 'A' + nib1 - 0xA;
|
|
buffer[i*2+1] = nib2 < 0xA ? '0' + nib2 : 'A' + nib2 - 0xA;
|
|
}
|
|
buffer[len*2] = '\0';
|
|
}
|
|
|
|
void displayError()
|
|
{
|
|
for (unsigned int i = 0; i < 6; i++)
|
|
{
|
|
digitalWrite(LED_BUILTIN, LOW);
|
|
delay(600);
|
|
digitalWrite(LED_BUILTIN, HIGH);
|
|
delay(300);
|
|
}
|
|
}
|
|
|
|
void displaySuccess()
|
|
{
|
|
digitalWrite(LED_BUILTIN, LOW);
|
|
delay(1000);
|
|
digitalWrite(LED_BUILTIN, HIGH);
|
|
delay(300);
|
|
}
|